|
Buyers Stainless Steel Hopper Spreader Kit — 96in.L, 1.8 Cu. Yd. Capacity, Std. Chute, Model# 1400050SS
Buy Buyers Stainless Steel Hopper Spreader Kit — 96in.L, 1.8 Cu. Yd. Capacity, Std. Chute, Model# 1400050SS online! Top-Power-Tools.com presents this offer with products by NorthernTool.com, where
you can get the top quality tools, hardware and equipment. This page features products in the category Snow + Ice Removal.
Worldwide shipping!
You can browse for other top quality tools, hardware and equipment using the menu on the left.
|
Buyers Stainless Steel Hopper Spreader Kit — 96in.L, 1.8 Cu. Yd. Capacity, Std. Chute, Model# 1400050SS
Ideal for medium and heavy-duty commercial applications. Ideal for municipalities, shopping malls, industries, hospitals and private contractors. Recommended for 3/4- or 1-ton trucks.
U.S.A. Spreader Type: Chute, Spread-able Material: Salt, sand and other material, Hopper Material: Stainless steel, Spinner Material: Stainless steel, Spread Radius (ft.): 2 to 25, Hopper Capacity (cu. ft.): 48.6, Overall Dimensions H x W x D (in.): 32 1/2H x 47W Body side length: 96in.
Overall length: 113in. Capacity struck: 1.8 cu. yd.
Capacity rounded: 2.1 cu. yd. Width: 47in.; height: 32 1/2in.
Std. chute Recommended for 3/4- or 1-ton trucks Completely self-contained, ultra-durable spreader unit for ice and snow control, salt, sand and other materials Complete assembly mounts easily on pickup, dump and platform trucks High-quality grade 304 stainless steel components, including hopper, hopper supports, hopper floor, gussets, spinner chute assembly, deflectors and engine hood Electrically welded ends and sides sloped at 45° are constructed with channel formed top edges Vertical supports add extra strength to the unit Single lift point on the cross support beam is located at the units center of gravity to allow for easy loading and unloading Conveyor is made of 12in. wide all-steel pintle chain with 3/16in.
x 3/4in. cross bars Chain strength is 11,000 lbs. per strand; 22,000 lbs.
total weight Drive sprockets are 6-tooth cast iron, on a 1 1/8in. diameter shaft Conveyor chain has an adjustment range of 3 1/2in. Drive shaft has heavy-duty, sealed, self-aligning ball bearings with grease fittings Idler drum has heavy-duty 1in.
diameter ball bearings Gear is constructed of aluminum bronze, worm gear is hardened steel and ground Housing is made of durable cast iron Gear ratio is 20:1 with 1in. input shaft and 1 1/8in. output shaft on tapered roller bearings Feed gate lever operated with a friction lock for accurate adjustment High-quality grade 304 stainless steel spinner chute assembly, deflectors and engine hood Polymer disc with four fins is connected to a 3/4in.
diameter shaft secured on 2 pillow block bearings Spreading material is guided from the conveyor to the spinner plate through an enclosed chute with internal and external deflectors Adjustable deflectors allow for complete directional spread control and full or compact spread Total spread radius ranges from 2ft. to 25ft. Extra-wide rear deflector protects the rear and under carriage of the vehicle Heavy-duty 10.5 HP industrial/commercial Briggs & Stratton® gasoline engine comes equipped with alternator and 12V electric starter with in-cab start/stop and electric throttle control Throttle control unit allows for full-range of throttle settings, including idle and full choke, via the in-cab hopper control box Use of electric throttle control eliminates cable freezing, binding and breaking 12V DC electric clut
Keywords: Salt Spreaders, shoulder, tailgate, sand, pickup
Price: $3.00
 Product detail / Order form
 |
Browse more tools, hardware and equipment:
|
|
Abrasive + Sand Blasters (142)
All rights reserved.